Stick to the spirit of ingenuity CNC precision machining 20 years of technical engineer guidance
High-tech foundation Insist on innovation and development Senior technical talent team
Torque up to 4678nm Senior technical guide selection Special customization according to customer needs
ISO9001 international certification Adhere to standardized production processes 1 million cycles durability test
COVNA Industrial Automation Co., Ltd. was established in 2000, an automated valve specialist. Headquartered in Dongguan China, with 3 production bases located in Ningbo, Wenzhou and Dongguan.
We Provide Electric Valve，Solenoid Valve，Pneumatic Valve，Electric Gate Valve，Electric Butterfly Valve，Pneumatic Control Valve，Motorized Valve，Pneumatic Knife Gate Valve，Control Valve Pneumatic，Pneumatic Actuated Valve，Motorized Operated Valve，Electric Ball Valve，Electric Actuated Ball Valve，Ball Valve，Gate Valve，Gate Valve，Butterfly Valve，Globe Valve，etc, You can browse related products and initiate consultations on our website.
Pneumatic V-shaped ball valve is a right-angle rotation structure, which is composed of a V-shaped valve body, pneumatic actuator, positioner and other accessories; it has an inherent flow characteristic of approximately equal percentage; it adopts a double-bearing structure, which has a small starting torque and has a relatively high Good sensitivity and induction speed; super shearing ability.
1. The opening and closing direction of the pneumatic valve should always be closed clockwise.
2. Since the pneumatic valves in the pipe network are often opened and closed manually, the number of opening and closing revolutions should not be too much, even for large-diameter valves, it should be within 200-600 revolutions.
3. In order to facilitate the opening and closing operation of one person, the maximum opening and closing torque should be 240N-m under the pipeline pressure condition.
4. The opening and closing end of the pneumatic valve should be a square tenon, with standardized dimensions, and face the ground so that people can directly operate it from the ground. Valves with roulette are not suitable for underground pipe networks.
5. The display panel of the degree of opening and closing of the pneumatic valve
①The scale line of the degree of opening and closing of the pneumatic valve should be cast on the gearbox cover or on the outer shell of the display panel after changing the direction.
②In the case of better management, the material of the indicator needle can be made of stainless steel plate, otherwise it is painted steel plate, do not use aluminum skin;
③The indicator disc needle is eye-catching and fixed firmly. Once the opening and closing adjustment is accurate, it should be locked with rivets.
6. If the pneumatic valve is buried deeply, and the distance between the operating mechanism and the display panel is ≥1.5m from the ground, it should be equipped with an extension rod facility and fixed firmly so that people can observe and operate from the ground. In other words, the opening and closing operations of valves in the pipe network are not suitable for downhole operations.
Anti-corrosion inside and outside pneumatic valve
1. The inside and outside of the valve body (including the variable-speed transmission box) should be shot blasted to clean the sand and rust, and strive to electrostatically spray the powdery non-toxic epoxy resin with a thickness of more than 0.3mm. When it is difficult to electrostatically spray non-toxic epoxy resin for extra-large valves, similar non-toxic epoxy paint should also be brushed or sprayed.
2. The inside of the valve body and the various parts of the valve plate require comprehensive anti-corrosion. On the one hand, it will not rust when immersed in water and will not produce electrochemical corrosion between the two metals; on the other hand, the surface is smooth to reduce the water resistance.
3. The sanitary requirements of the anticorrosive epoxy resin or paint in the valve body should have the inspection report of the corresponding authority. The chemical and physical properties should also meet the relevant requirements.
The pneumatic V-shaped ball valve is a right-angle rotation structure. It can be used with a valve positioner to achieve proportional adjustment; the V-shaped spool is most suitable for various adjustment occasions. It has a large rated flow coefficient, a large adjustable ratio, and a good sealing effect. , The adjustment performance is sensitive, the volume is small, and it can be installed vertically. It is suitable for controlling gas, steam, liquid and other media.
The workmanship is in place, and the quality is very good at a glance!
Regular customers, the cooperation has been very happy!
The workmanship is fine, the size is right, the design is in place, and the service is attentive and attentive!
What is a pneumatic valve and what is the function of pneumatic valve A pneumatic valve is also known as directional control valves, the major function of a pneumatic valve is to switch airflow. These valves are capable to maintain the pressure. The range of pneumatic valves is vast and there are many categories of pneumatic valves.
Pneumatics are also used in control valves, pneumatics has many applications in different industries. It also has other applications such as dentistry, construction, and mining.
The pneumatic actuator uses compressed air as the power source, and the movement of the piston drives the crank arm to rotate at 90 degrees, so that the valve can be opened and closed automatically. Its components are: adjusting bolt, actuator box, crank arm, cylinder block, cylinder shaft, piston, connecting rod, cardan shaft.