How to do the daily maintenance of the knife gate valve?

1. Do a good job of cleaning
Because the application environment of the knife gate valve is relatively special, it is generally used in industrial pipelines, so it is relatively easy to cause a lot of pollution. Once impurities enter it, the quality of the knife gate valve will also have a big problem. Therefore, it is recommended to do a good job of basic cleaning every once in a while, and check whether there are certain impurities entering during the internal maintenance process. Only in this way can better application results be guaranteed.

2. Do a good job of lubrication

During the operation of the knife gate valve, there must be a corresponding lubrication process, so it is necessary to do a good job of basic lubrication. Generally, internal basic inspections must be done every quarter. Only in this way can it be determined whether the ball valve needs to be repaired. If the lubrication is not done well, it will indeed affect the subsequent application, so the basic lubrication work also needs a fixed time to do.

3. Do a good job of inspection

In fact, in the process of using the knife gate valve, we can roughly determine whether the knife gate valve is in normal operation, whether there are some faults, etc. Once some minor problems are really discovered, follow-up processing should be carried out in time. Find minor problems and deal with them in time, so that subsequent applications will not be affected.

If you want to know the price of knife gate valve, please contact us!