How to do the daily maintenance of the knife gate valve?
  • Nov 28, 2022

How to do the daily maintenance of the knife gate valve?

1. Do a good job of cleaning Because the application environment of the knife gate valve is relatively special, it is generally used in industrial pipelines, so it is relatively easy to cause a lot of pollution. Once impurities enter it, the quality of the knife gate valve will also have a big problem. Therefore, it is recommended to do a good job of basic cleaning every once in a while, and check whether there are

Read more >>
What are the main standout advantages of knife gate valve?
  • Nov 21, 2022

What are the main standout advantages of knife gate valve?

Compared with ordinary gate valves, knife gate valves mainly highlight the following advantages: 1.U-shaped gasket has excellent sealing effect. 2.Full-bore design ensures strong medium passing capacity. At the same time, it is easy to install and disassemble under the working condition of dirty medium, and the maintenance is convenient and fast. The seal of the valve can be replaced without removing the gate v

Read more >>
Features of Knife Gate Valve
  • Oct 24, 2022

Features of Knife Gate Valve

Knife gate valve is also called knife gate valve, knife gate valve, slurry valve and mud valve. Its opening and closing parts are gate plates. The movement direction of the gate plate is perpendicular to the direction of the fluid. The medium is cut off by a knife edge gate which can cut fiber materials. The gate plate has two sealing surfaces. The two sealing surfaces of the most commonly used mode gate valve form w

Read more >>
What is Electric Control Valve?
  • Oct 24, 2022

What is Electric Control Valve?

The electric control valve is a hydraulically operated valve with a solenoid valve as a guide valve. It is often used for automatic control in water supply and drainage and industrial systems. The control response is accurate and fast, and the pipeline system is remotely opened and closed according to electrical signals to realize remote operation. Can replace gate valve and butterfly valve for large electric operati

Read more >>
The difference between Air Operated Valve and Electric Valve
  • Oct 24, 2022

The difference between Air Operated Valve and Electric Valve

A pneumatic valve is a valve driven by compressed air. When purchasing pneumatic valves, it is only necessary to specify the specifications, types, and working pressures to meet the purchasing requirements. flow. The difference between the pneumatic valve and the solenoid valve is the difference in the signal source. The solenoid valve uses electricity to control the pilot gas to push the valve core to change dire

Read more >>
What are the advantages of gate valve?
  • Sep 07, 2022

What are the advantages of gate valve?

1. Small flow resistance. The medium channel inside the valve body is straight, the medium flows in a straight line, and the flow resistance is small. 2. It is more labor-saving when opening and closing. Compared with the globe valve, because whether it is open or closed, the direction of movement of the gate is perpendicular to the flow direction of the medium. 3. The height is large and the opening and closing ti

Read more >>